top of page

UDO Audio DMNO ON Is Available Now With Modular Controls

Writer: Kamil
Kamil
4 hours ago
6 min read

UDO Audio DMNO ON is available now, putting the complete eight-voice, two-part DMNO engine into a desktop unit with add-on control modules. It keeps the keyboard model’s two independent hybrid synths, but replaces its twin control panels with one shared set and the new ON System. That makes the instrument much smaller, though rebuilding the full hands-on layout adds to the price.


White DMNO desktop synth with black knobs, sliders, green display and perforated front edge, angled front view

Note: This post contains affiliate links. If you choose to buy through them, I'll get a small kickback - at no extra cost to you. It helps me keep Noise Harmony going. Thank you!


Table of contents


What changed from the keyboard DMNO?


Top-down view of the DMNO ON panel: mixer, control section with display, OSC, VCF, MOD, LFO and envelope sliders
From above you can see the single shared panel, including the two red buttons left of the numbered row that switch control between the engines. SOURCE: UDO Audio

The desktop model keeps the synthesis engine while losing the keyboard and second control panel. It measures 487 × 220 × 107 mm and weighs 4.5 kg, compared with 780 × 380 × 115 mm and 8.5 kg for the keyboard DMNO. Rear feet raise the unit to 132 mm, while VESA mounting points let you place it on a compatible monitor arm when the desk has finally run out of room.


The base unit uses two red DMNO buttons to switch its controls between DMNO 1 and DMNO 2. Features found in the keyboard model’s performance area, including LFO 2, portamento and external-controller modulation settings, remain available through display menus. UDO uses a wide-angle vacuum fluorescent display for patch management, effects, filter settings and sequencer editing. UDO’s Introducing DMNO ON — Desktop Synthesizer video is an official launch video.



UDO Audio introduces the DMNO ON enclosure, shared control panel and optional ON expansion modules.


The UDO Audio DMNO ON keeps both synth engines


White DMNO desktop synth seen from the front on a black background, with display reading Bank B
The front edge reads "8 voice polyphonic dual module binaural analog-hybrid synthesizer," which matches the two-engine design described here. SOURCE: UDO Audio

The UDO Audio DMNO ON contains two independent analog-hybrid synth engines called DMNO 1 and DMNO 2. Each combines two FPGA-based digital super-wave oscillators with an analog Dynamic Multi-Core Stereo VCF and DSP effects. You get eight conventional voices, or four paired voices in Binaural mode, where the left and right channels can use different tuning, phase, amplitude and filter settings.


Eight Play Modes decide how the two engines respond to incoming notes. Single, Dual and Split cover familiar setups, while One-Two, Rotate, Random and Chaos divide notes between the engines in different ways. Cascade sends DMNO 1 into DMNO 2’s oscillator mixer, turning the first engine into a complex sound source for the second. The synth also includes delay, reverb, distortion, chorus, three-band EQ, a 64-step sequencer and a MIDI-syncable arpeggiator with Smart Hold.


Sound matters more than a diagram of two oscillators and a filter. UDO’s DMNO ON | 17 Sound Demos With Hazel Mills presents 17 sound demos and gives the dual-engine and binaural features some musical context. It is the more useful video if you want to hear the instrument before studying every routing option.



Hazel Mills plays 17 DMNO ON sounds, giving the dual-engine and binaural features useful musical context.



Also check



The ON System can rebuild the twin-panel layout


DMNO desktop synth joined by an add-on module with a second set of synth controls, angled view
With a second synth-control module attached, the setup brings back the keyboard model's twin-panel layout so both engines can be edited at once. SOURCE: UDO Audio

The ON System lets you add physical controls without buying them as part of the base instrument. The ONM-1 Synth Control duplicates the main synth panel, so DMNO 1 and DMNO 2 can be edited simultaneously. It connects through a screw-locking D-Sub cable and receives power from the base unit, so another power supply is not needed.


The ONM-1 measures 236 × 220 × 107 mm, weighs 3 kg and can use the same raised-foot position as the main unit. As of November 19, 2026, it is €766 including VAT at Thomann, with stock expected within two to three weeks rather than immediately. Adding it to the €2,439 base unit brings the November 19, 2026 combined price to €3,205 including VAT.


UDO has also announced the ONM-2 FX Control, which breaks out the send effects, insert effects and three-band EQ and adds an LED parameter display. UDO still lists it as coming soon, with no confirmed price or availability date. Players who want keys and two permanent synth panels may still prefer the original DMNO, while the desktop version makes more sense beside an existing controller.



Connections are strong, but the manual needs an update


Rear panel with UDO logo, power inlet, ON Connect port, USB, MIDI In/Out/Thru, pedal, CV/gate and audio jacks
The rear panel has USB, five-pin MIDI In, Out and Thru, pedal inputs, CV/gate, stereo inputs, aux and mix outputs, headphones and the ON Connect port. SOURCE: UDO Audio

The synth includes class-compliant USB MIDI and a two-input, two-output 24-bit USB audio interface. It also has five-pin MIDI In, Out and Thru, although USB MIDI and DIN MIDI cannot operate at the same time. Stereo external inputs feed audio through DMNO 1 and include variable gain, gate detection and an envelope follower for the modulation matrix.


The rear panel also provides stereo Mix Out, assignable auxiliary outputs, headphones, two CV outputs, two gate outputs and connections for volume, expression and single or dual footswitches. The auxiliary pair can carry either synth engine, the main mix or USB audio. This is more than a simple keyboard-free version, especially if the instrument will sit between a DAW, modular gear and an external controller.


One published specification still needs clarification. UDO’s current DMNO ON page lists 256 performances and 256 patches, but the September 2026 manual documents 128 of each. The support page also says new firmware is coming but does not provide a public download, version number or change log. Until UDO updates the documentation, buyers should treat the higher memory count as a product-page claim rather than a settled firmware specification.


Price and Availability


UDO introduced DMNO ON through its official launch video on October 6, 2026. As of November 19, 2026, it is €2,439 at Thomann, including VAT, and marked in stock. The final checkout price can change with the destination’s VAT rate. The ONM-1 is around €766, while the ONM-2 remains listed as coming soon.


DMNO desktop synth with two add-on modules attached, the last one with red buttons and a red display
This fully expanded setup adds a third module with red buttons and its own red display alongside the duplicated synth controls. SOURCE: UDO Audio

DMNO ON suits players who already have a MIDI keyboard and want the complete dual-engine DMNO in less space. The base unit is the sensible buy if switching one panel between two parts does not interrupt your work. Add the ONM-1 only when simultaneous control matters. Full specifications and current module information are available on the official DMNO ON page.


Put the Full DMNO Engine on Your Desk


DMNO ON was marked in stock on November 19, 2026, while the ONM-1 had a short wait. Check the current price and availability for your destination before ordering.



More information



Frequently Asked Questions


Is the UDO Audio DMNO ON a cut-down DMNO?


No. It keeps the keyboard model’s eight-voice, two-part synthesis engine, analog filters, effects and Play Modes. The main changes are the missing keyboard and the single shared synth control panel.


Do I need the ONM-1 to use both synth engines?


No. Both engines work in the base unit, and two buttons select which one the shared panel edits. The ONM-1 adds a second control set so both engines can be adjusted without switching panels.


Can DMNO ON send audio over USB?


Yes. It includes a class-compliant two-input, two-output 24-bit USB audio interface alongside USB MIDI. The manual says USB MIDI and five-pin DIN MIDI cannot be used simultaneously.


How many patches can DMNO ON store?


UDO’s DMNO ON page lists 256 patches and 256 performances, but the current manual still says 128 of each. The figures should be treated as unresolved until UDO publishes matching firmware documentation.



ABOUT THE AUTHOR

Kamil

Kamil

Sound designer, synths and keys


Kamil is our synth and keys guy: if it has black and white keys, he has played it. He grew up on progressive rock and metal and designs sounds for Noise Harmony. His sounds have gone into work with KORG, Arturia, Xfer Records (Serum 2) and many more. Off the clock he plays in his own bands: music is simply his whole life.



FOLLOW US ON


Comments


GET -10% DISCOUNT

Sign up for our newsletter today and unlock an exclusive offer: receive -10% discount just for joining!


Stay ahead with updates on new products, promotions, coupons, and much more.

Thank you for subscribing to our newsletter!

bottom of page