Xfer Records SHRUB: Everything You Need to Know

2 hours ago
11 min read
Xfer Records SHRUB puts a free, Serum-derived wavetable synth inside the pocket-sized M-VAVE FM-1. It comes as replacement firmware, a browser editor and a VST3, but it remains a public beta and does not turn the little box into full Serum 2. This guide covers what SHRUB does, how to install it safely, where it differs from Serum and which presets it can actually load.

Table of contents
What is Xfer Records SHRUB?

Xfer Records SHRUB is free replacement firmware that swaps the M-VAVE FM-1’s original FM engine for a Serum-derived wavetable synth. Steve Duda is named as its maker, and firmware V1.00 arrived with guide version 1.0 in November 2026. Xfer still labels it as a beta, so version 1.00 should be treated as the first public release rather than finished long-term firmware.
The underlying M-VAVE FM-1 is a small rechargeable synth with 27 silicone keys, a color TFT screen, built-in speaker and 3.5 mm headphone output. It also has USB-C, Bluetooth BLE MIDI and a 3.5 mm MIDI input. M-VAVE specifies a 2,000 mAh battery, about 12 hours of use, dimensions of 161.5 × 96.5 × 28.6 mm and a weight of about 251 g.
Those hardware details stay the same after installing SHRUB, but the engine and control assignments change. The stock firmware uses six sine-wave operators, 32 algorithms and 128 tones, while SHRUB replaces that with wavetables, modulation, effects and performance tools. M-VAVE’s official FM-1 product video is also available.
M-VAVE’s official FM-1 video shows the pocket synth’s physical controls, connections and portable format.
Firmware, browser editor and VST3 do different jobs

SHRUB comes in three connected forms, and each handles a different part of the setup. The firmware turns the FM-1 itself into the synth, while the browser editor gives you a larger interface for editing sounds and managing its library. The VST3 brings the matching engine and editor into a DAW.
The browser editor can also make sound without the hardware in a modern browser. Connecting an FM-1 requires Chrome or Edge because SHRUB uses Web MIDI, after which edits and preset changes move both ways. Once connected, browser-generated sound switches off and you hear the hardware instead.

The VST3 version 1.00 is available for macOS Universal, Windows x64, Linux Arm/arm64 and Linux x64/amd64. It saves its complete state inside a DAW project and supports automation, but it has no SEQ tab, cannot connect directly to the FM-1 and cannot install firmware. Xfer runs the device code inside the plugin for matching results, so CPU use can be higher than its simple interface suggests.
macOS Universal VST3: 8.0 MB
Windows x64 VST3: 4.6 MB
Linux Arm/arm64 VST3: 4.0 MB
Linux x64/amd64 VST3: 3.9 MB
No AU, AAX or CLAP version is listed
How do you install SHRUB on the M-VAVE FM-1?

You install SHRUB from Xfer’s browser-based firmware installer using Chrome or Edge, a computer and a USB data cable. Close the SHRUB editor, M-VAVE updater, DAW and any other program using the FM-1 first. This matters especially on Windows, where only one program can hold its MIDI port at a time.
Open the official SHRUB installer, choose `Use the SHRUB on this site` and press `Install`. Allow MIDI and SysEx access when the browser asks, then leave the FM-1 connected for about two minutes. Its screen displays `SHRUB UPDATE`, and the unit restarts into SHRUB when the process finishes.
If writing has already begun and the update stops, the FM-1 stays in update mode even after a power cycle. Run the installer again and it should continue, while a unit that received no data returns to its previous firmware after about one minute. For deeper recovery, connect USB and hold OCT− and OCT+ while powering on until `USB RECOVERY` appears.
Power on the FM-1 and connect a USB data cable
Close software that may be using its MIDI port
Open the installer in Chrome or Edge
Choose the hosted SHRUB package or a local `.fwsc` file
Grant MIDI and SysEx permission
Keep the cable attached until the installation finishes
What synth engine is inside SHRUB?

SHRUB uses two wavetable oscillators, a sub oscillator and noise before a shared stereo filter and seven-slot effects rack. Oscillators A and B each get 64 built-in tables drawn from Serum 2, selected Serum 1 material, factory-preset requirements and several generated tables. You can also import user tables or build an ADDITIVE table from 24 harmonics.
Each main oscillator offers WT POS, warp, level, one to eight unison voices, detune, blend, stereo width and detailed tuning controls. The warp choices include sync, bend, PWM, asymmetry, mirror, remap and quantize. FM, AM and ring modulation can use the other oscillator, sub or noise as the source.

WT POS crossfades through the frames of the selected table, which is the basic movement behind wavetable synthesis. Our explanation of how wavetable synthesis works covers the same idea with familiar examples from Serum, Massive and Vital. SHRUB also accepts Serum-style WAV tables with 2,048 samples per frame, although it reduces anything longer than 64 frames to 64 evenly spaced frames.
The sub oscillator offers sine, triangle, square, saw, round rectangle and pulse shapes across a range of four octaves down to four octaves up. Noise comes in white, pink, brown, blue and crush colors, with a fixed pitch control that does not follow the keyboard. These sources can be routed through the filter or sent around it.
Why SHRUB’s shared filter matters

SHRUB has one stereo filter shared by every note, which is its largest sound and behavior difference from Serum. A single note can follow Serum’s filtering closely, but a chord does not get a separate filter and filter envelope for every voice. Instead, all held notes pass through the same filter together.
The engine includes 76 Serum filter types, covering 6, 12 and 24 dB low-pass, high-pass, band-pass, peak and notch designs. It also includes MG models, ladder and acid filters, all-pass, comb, flanger, phaser and dual-filter combinations. Cutoff, resonance, drive, wet/dry mix, key tracking, ENV 2 depth, stereo spread and a type-specific FAT control are available.
On chords, KEY TRK follows the newest note and resonance follows the loudest note. ENV 2 also sweeps the shared filter once rather than restarting an independent sweep for every voice. You can bypass the filter separately for oscillator A, oscillator B, noise and sub, which is useful when a bass patch needs a steady sub below a moving resonant layer.
Also check
How deep are modulation and effects?

SHRUB provides enough modulation for detailed patches, with three envelopes, four LFOs, two chaos generators and 16 matrix slots. ENV 1 shapes amplitude separately for each note, while ENV 2 and ENV 3 are global. A new note restarts those global envelopes from their current position, and they enter release after the last held key is lifted.
The four shared LFOs support free-running, retriggered and envelope modes, along with free or tempo-synced rates. Shapes made on the hardware use start, peak, end and one extra point, while the editor can draw up to 17 points with curved segments. The two Serum 1 chaos sources use Lorenz and Rössler attractors, each providing X and Y signals for movement that does not repeat like a regular LFO.

The matrix accepts sources including envelopes, LFOs, chaos, note, velocity, aftertouch, pitch bend, mod wheel and four macros. In the editor, dragging a source onto an available knob creates a route at +25%, which will feel familiar if you already use Serum. Our Serum 2 quickstart explains this drag-and-drop approach in the full plugin.
The seven-slot effects rack uses Serum 1 algorithms and lets you change the order. Modules include Hyper/Dimension, distortion, flanger, phaser, chorus, delay, compressor, reverb, EQ and an FX filter that can use every main filter type. The compressor includes its familiar three-band OTT mode, while reverb offers plate and hall modes.

What can the scale, arp and sequencer do?

SHRUB adds useful performance tools that go well beyond a basic pocket wavetable synth. Its scale system includes 51 Serum 2 scales, selectable keys and chord modes. With a scale active, the hardware keyboard, incoming MIDI, arpeggiator and sequencer are all corrected to its notes.
The algorithmic arp offers 19 patterns, rates from one bar to 1/64, dotted and triplet values, one to four octaves and gate settings from 1% to 200%. It also provides chance, repeats, offset, retrigger and latch controls. Gates above 100% overlap notes, which can create slides when LEGATO is active.
The eight-lane motion sequencer records knob moves or notes, with a maximum of two note lanes and one note at a time in each lane. A lane can run from one to 128 bars, and the ALGORITHM knob halves or doubles its length. Continuous values glide between points, stepped settings jump, and note lanes can be exported from the editor as MIDI files.
Which Serum presets can SHRUB load?

SHRUB can import Serum 1 `.fxp` presets, but it cannot import Serum 2 `.SerumPreset` files. You can open individual files, select several at once or load a complete Serum 1 folder as a bank. The editor can also browse the Serum 1 factory library without Serum 1 being installed.

Conversion covers oscillators, embedded or named wavetables, warps, unison, sub, noise, Serum 1 filters, envelopes, drawn LFOs, chaos and matrix routing. It also brings across the first seven effects, then reports anything it could not reproduce. This report matters because some patches will need adjustment.
The direction back to Serum 2 does work. `File > Export to Serum2` creates a `.SerumPreset` with the required wavetables embedded, but the arp, scales, voice control and per-note random settings do not transfer. Resonant chords may also change because Serum 2 returns to filtering each voice separately.
Our Serum 1 and Serum 2 comparison explains the wider differences between the two plugins. I made Dream Horizon and Vanilla 33 for Serum 2, so they are related Serum sound libraries rather than direct SHRUB imports. Do not buy a Serum 2-only pack expecting SHRUB to open it.
`.shrub`: one sound and its motion lanes
`.shrubbank`: all 128 slots, wavetables and MIDI map
`.shrubmidimap`: MIDI controller assignments
`.fxp`: Serum 1 preset import
`.SerumPreset`: Serum 2 export
`.wav`: user wavetable import
`.mid`: note-lane export
`.fwsc`: firmware package
Hear it: “Parallel Dimension” for Serum
Two sounds from our “Parallel Dimension” presets for the Serum, plus the full demo track. Have a listen before you start turning knobs.
ARP Absolute ZeroNoise Harmony · Parallel Dimension
Pad SpeedNoise Harmony · Parallel Dimension
Parallel Dimension (full demo)Noise Harmony · Parallel Dimension
Xfer Serum 2 | 60+ Presets | „Parallel Dimension”
€25.00€12.50
Buy Now
Who should use SHRUB, and who should keep the stock firmware?

SHRUB makes the most sense for an FM-1 owner who wants portable wavetable synthesis and accepts beta software. It also suits Serum users who want familiar oscillators, modulation and effects in a battery-powered box. The browser editor and matching VST3 make it easier to move between hardware editing and a DAW than the FM-1 screen alone.
Keep the stock firmware if its six-operator FM engine is the reason you bought the FM-1. SHRUB replaces that operating system rather than adding a second engine, although you can return to M-VAVE firmware with the official updater. Xfer says its installer does not change the device’s boot code.
Full Serum 2 remains the better choice when you need samples, granular or spectral synthesis, per-voice filtering and complete Serum 2 preset support. The SHRUB VST3 is useful as a matching editor and free instrument, but its higher-than-expected CPU use and missing sequencer tab keep it from replacing the full plugin. A small box is still a small box, even when somebody manages to fit 76 filters inside it.
SHRUB itself is free, but Xfer says it is not made, sold or supported by M-VAVE and installation is at your own risk.
Is Xfer Records SHRUB worth installing?
Yes, for an FM-1 owner who wants Serum-style wavetable synthesis and understands the beta warning. SHRUB turns modest hardware into a four-note synth with two wavetable oscillators, deep modulation, 76 filters, seven effects slots and useful performance tools. The free browser editor and VST3 make the package much more practical than firmware alone.
It should not be mistaken for Serum 2 in a pocket. The shared filter changes chords, heavy unison reduces available notes, Serum 2 presets will not import and the VST3 leaves sequencing to the browser editor. Keep a route back to the stock firmware, use a proper USB data cable and let the installer finish without interruption.
Get SHRUB From Xfer Records
Download the current beta, read the operation guide and check the installation steps before connecting your FM-1. The official site also provides the browser editor, and the VST3 downloads are available through the editor’s download metadata.
More information
Frequently Asked Questions
Is Xfer Records SHRUB free?
Yes. SHRUB firmware, the browser editor and the VST3 are free. You still need an M-VAVE FM-1 to run the hardware version.
Is SHRUB the same as Serum 2?
No. SHRUB borrows wavetables, filters, modulation ideas and effects from Serum, but it has a smaller engine and one shared stereo filter. It does not include Serum 2’s full sample, granular and spectral features.
Can SHRUB import Serum 2 presets?
No. SHRUB cannot import `.SerumPreset` files from Serum 2. Its editor imports Serum 1 `.fxp` presets and can export SHRUB sounds to Serum 2.
How many notes can SHRUB play?
SHRUB plays up to four notes from a pool of 16 voices. Heavy unison settings can reduce that number, although Xfer says one note will always play.
Can I return the FM-1 to its original firmware?
Yes. Use M-VAVE’s official firmware package and updater to restore the stock operating system. Xfer says the SHRUB installer does not alter the FM-1 boot code.
Does the SHRUB VST3 connect to the FM-1?
No. Version 1.00 cannot connect to the hardware or install firmware. Use the Chrome or Edge browser editor for those jobs.
Does SHRUB work without the M-VAVE FM-1?
Yes, in software. The browser editor can make sound on its own, and the VST3 works as a free instrument on supported macOS, Windows and Linux systems.
Can installing SHRUB brick the FM-1?
An interrupted update can usually be resumed, and USB recovery mode is available by holding OCT− and OCT+ during power-on. However, SHRUB remains beta firmware not supported by M-VAVE and installed at the user’s own risk, so follow Xfer’s recovery instructions carefully.
ABOUT THE AUTHOR

Kamil
Sound designer, synths and keys
Kamil is our synth and keys guy: if it has black and white keys, he has played it. He grew up on progressive rock and metal and designs sounds for Noise Harmony. His sounds have gone into work with KORG, Arturia, Xfer Records (Serum 2) and many more. Off the clock he plays in his own bands: music is simply his whole life.
FOLLOW US ON





































Comments