iLoud Micro Monitor 2 Adds ARC and Starts at €299.99

5 hours ago
5 min read
IK Multimedia has announced iLoud Micro Monitor 2, with built-in ARC room correction, new drivers and USB-C audio in its ultra-compact studio monitor line. It arrives ten years after the original iLoud Micro Monitor, which IK says has sold more than a quarter of a million speakers. The new pair targets small studios, portable setups and crowded desks where accurate monitoring usually involves a few awkward compromises.

Note: This post contains affiliate links. If you choose to buy through them, I'll get a small kickback - at no extra cost to you. It helps me keep Noise Harmony going. Thank you!
Table of contents
iLoud Micro Monitor 2 brings ARC correction to small desks

Built-in room correction is the biggest change in the iLoud Micro Monitor 2. ARC X measures the listening space and creates a correction profile that runs on the speakers’ internal DSP. The aim is to reduce problems caused by nearby walls, desks and room resonances, particularly where they disturb the bass balance. That matters when the available studio space is a bedroom corner rather than a treated control room.
The correction stays inside the monitors once it has been created, so it does not depend on a plug-in running in every project. ARC X also provides a six-band EQ, custom speaker voicing and virtual monitor emulation for checking a mix through other reference profiles. IK includes a measurement microphone with one version, while the cheaper package is intended for people who already have a compatible ARC microphone. Anyone who has spent an afternoon moving small speakers around a desk will understand why this is the headline feature.
New drivers extend the bass and widen the sweet spot

IK has redesigned the drivers, amplification, converters and enclosure rather than adding ARC to the old speaker. A new 3-inch composite-fiber woofer handles the bass and midrange, while a redesigned rear port helps extend and control the low end. The 3/4-inch silk-dome tweeter sits in a precision waveguide designed to keep the tonal balance more consistent when the listener moves away from the center. That wider listening area should help when two people are working at the desk or when you lean over to reach the controller that somehow found the last free six inches.
The published frequency response is 49 Hz to 28 kHz within ±2 dB, with low-frequency extension reaching 40 Hz at -10 dB. Four Class-D amplifiers provide 50 W RMS for the system and 70 W peak power. Linear-phase processing, drawn from the IK Multimedia iLoud MTM MKII and IK Multimedia iLoud Micro Monitor Pro, keeps phase coherence within ±20 degrees between 220 Hz and 23 kHz. IK Multimedia’s iLoud Micro Monitor 2 - Studio Sound that Fits on Any Desk gives a useful overview of the new design and shows how the pair fits into a compact setup.
3-inch composite-fiber woofer
3/4-inch silk-dome tweeter
49 Hz–28 kHz response within ±2 dB
40 Hz low-frequency extension at -10 dB
50 W RMS and 70 W peak system power
IK Multimedia’s overview shows the redesigned monitors, their desktop footprint and the main ARC and connection features.
Also check
USB-C audio removes one box from a portable setup
The new connection options make the monitors easier to use with both simple and established studio rigs. USB-C digital audio connects directly to a computer, so playback does not require a separate audio interface. RCA inputs remain available for an interface, mixer or other audio equipment. Bluetooth uses the SBC codec and provides a convenient route for music, films and playback from a phone or tablet.
The new iLoud Control app for iOS and Android handles EQ and speaker-voicing changes from a phone. Integrated isolation tilt-bases angle the cabinets toward the listening position, while 3/8-inch stand mounts and bracket support provide alternatives to placing them directly on a desk. The redesigned low-resonance molded enclosure also uses a new rear bass-reflex system. These details make the pair useful for video editors and mobile producers as well as musicians who need a permanent desktop reference.
Who should consider iLoud Micro Monitor 2?
The iLoud Micro Monitor 2 suits people who need useful monitoring without giving most of the desk to two large cabinets. Its strongest case is a small or temporary room where built-in correction can address some of the listening-position problems. USB-C also makes sense for a laptop setup that does not need microphone or instrument inputs. Producers with a larger treated room may still prefer bigger nearfields, especially when deep bass output matters more than portability.
Owners of the 2016 model get several clear reasons to look at the new pair: ARC X, app control and new drivers. The new pair also features USB-C audio and linear-phase processing. The bass specification needs reading carefully, because 40 Hz is the -10 dB extension rather than the ±2 dB response limit. IK supports integration with an iLoud Sub. The monitors can also become a secondary reference or join larger stereo, multichannel and immersive iLoud systems with ARC Studio or ARC STUDIO+.
Price and availability
The iLoud Micro Monitor 2 is available to pre-order now and is scheduled to begin shipping in December 2026. IK Multimedia lists the pair at $/€349.99 with an ARC measurement microphone. A version without the microphone costs $/€299.99 for users who already own a compatible ARC mic. These prices exclude taxes.
The microphone package is the safer choice for a first ARC setup, because it includes what you need to measure the room. Existing ARC users can save money with the basic package, provided their microphone is compatible. For a small untreated workspace, the correction system, direct USB-C connection and compact cabinets make a strong combination. Full specifications and demonstrations are available on the official iLoud Micro Monitor 2 page.
Check iLoud Micro Monitor 2 at Thomann
Shipping is due to begin in December 2026, so check Thomann for current stock and local pricing. Choose the microphone bundle if this will be your first ARC calibration setup.
More information
Frequently Asked Questions
Do I need an audio interface for iLoud Micro Monitor 2?
No. The monitors accept digital audio directly from a computer over USB-C. RCA inputs are also provided for connecting an existing audio interface, mixer or other equipment.
Does iLoud Micro Monitor 2 include an ARC microphone?
It depends on the package. The $/€349.99 version includes an ARC measurement microphone, while the $/€299.99 version is for users who already own a compatible microphone. Both prices are per pair and exclude taxes.
How low does iLoud Micro Monitor 2 go?
The stated response reaches 49 Hz within the ±2 dB range. IK also gives a low-frequency extension figure of 40 Hz at -10 dB, and the system can be paired with an iLoud Sub.
ABOUT THE AUTHOR

Rafał
Sound designer, guitar tone, mixing and mastering
Rafał is the guitar tone person at Noise Harmony, from amps and effects to production, mixing and mastering. Plugins and the technical side of sound are his life. Over the years he has worked with Arturia, KORG, Xfer Records (Serum 2) and plenty of others, and he still plays in his bands whenever he can. Music isn't a job for him, it's everything.
FOLLOW US ON





































Comments