PRS Tekton Family: Are These Guitars Only for Shredders?
2 hours ago
4 min read
No, the PRS Tekton family is not only for shredders, although technical modern players were clearly the starting point. PRS has launched four Maryland-made bolt-on guitars with thin necks, flat fingerboards, stainless-steel frets and pickups designed to work well with digital rigs. The PRS Tekton T looks like the broadest all-round choice, but each model serves a different type of player.
Note: This post contains affiliate links. If you choose to buy through them, I'll get a small kickback - at no extra cost to you. It helps me keep Noise Harmony going. Thank you!
Table of contents
The PRS Tekton family starts with four models
PRS introduced four Tekton guitars on October 20, 2026: the hardtail PRS Tekton, tremolo-equipped Tekton T, Tekton “Floyd” and seven-string Tekton SVN. All four are bolt-on guitars made at the company’s Stevensville, Maryland factory. The body shape mixes ideas from the offset Vela and classic Custom, with a deep treble-side cutaway and sculpted heel for easier upper-fret access.
Every model has an ebony fingerboard, a flat 16-inch radius and 24 PRS Jumbo stainless-steel frets. The six-string guitars use a 25.5-inch scale, while the SVN stretches to 26.5 inches for firmer low strings. PRS also describes these as its thinnest standard-production bodies and necks so far.
Modern “D” maple neck
24 stainless-steel frets
Blue Luminlay side dots
Satin-nitro neck finish
PRS Premium Gig Bag included
PRS presents all four Tekton models and explains the shared design ideas behind the new family.
Stylus pickups are made for modelers, not just metal
The new PRS Stylus humbuckers use Alnico 5 magnets and have less output than some pickups aimed at high-gain players. PRS says their response is flatter than many of its other humbuckers, but they are not flat-response pickups. The aim is clearer interaction with digital modelers while retaining enough character for tube amps and conventional recording setups.
A three-way blade switch selects the bridge, both pickups or the neck, while the push/pull Tone control splits the coils. This creates six deliberately voiced combinations covering humbucker and single-coil sounds. A Guitar World reviewer tested the pickups through a Line 6 HX Stomp, while other independent reviewers used conventional amplifiers. They reported clear clean tones, tight high-gain sounds and useful split settings for rock, fusion, function-band work and modern metal. If you are new to saved modeler sounds, our article on what guitar presets are explains the basic terms.
Also check
Which PRS Tekton model fits you?
The PRS Tekton T is the easiest general recommendation because it keeps standard six-string tuning and adds a familiar floating two-point tremolo. The regular Tekton uses a string-through hardtail, making it the simpler option for stable tuning and changes between alternate tunings. Both combine a figured-mango top with a mahogany back.
The PRS Tekton “Floyd” is the most clearly shred-focused model, with an alder body and Floyd Rose 1000 Series double-locking tremolo. Its Floyd 1000 bridge may concern buyers expecting higher-tier hardware at this price. Reviewers also noted that the edge of the carved top can press against the picking forearm.
The SVN covers lower tunings
The seven-string PRS Tekton SVN has a 26.5-inch scale, 10–59 strings and factory B–E–A–D–G–B–E tuning. Its longer scale is designed to keep the low register clear without moving as far into baritone territory. It uses seven-string Stylus SVN pickups and the same six switching combinations as the other models.
Price and availability
At the time of writing, the Tekton and Tekton T are €2,999 at Thomann, and the Tekton Floyd and Tekton SVN are €3,099. All four come with a PRS Premium Gig Bag. Many finishes were still shown as preorder or several months away, so check the exact model and color before you plan around it.
You can see every finish and the complete specifications on the official PRS Tekton family page.
Check the PRS Tekton T at Thomann
The Tekton T offers the most flexible mix of modern playability, six pickup sounds and conventional tremolo control. Check current colors, stock status and dealer pricing before ordering.
More information
Frequently Asked Questions
Are PRS Tekton guitars only for shredders?
No. Their thin necks, flat fingerboards and stainless-steel frets suit technical playing, but the six pickup settings also cover clean tones, chords, rock and fusion. The Floyd model is the most clearly focused on shredding.
What is the difference between the PRS Tekton and Tekton T?
The bridge is the main difference. The Tekton has a fixed string-through hardtail, while the Tekton T uses a floating PRS Two-Point Tremolo with a steel plate and brass saddles.
FOLLOW US ON
Comments